Creating Life Check Zones in the app

You are here:
← Back

This article explains how to create Life Check Zones in the OnGuard application. 

What are Life Check Zones?

When users enter a Life Check Zone, they will be enrolled into Life Check Mode which means they will have to provide a Life Check (a proof of life) after a regular interval. The default interval is set to 30 mins. Check out this knowledge base article on how to configure Life Check Intervals. Users should be enrolled into Life Check mode when working alone or in small groups on tasks with an associated risk. When the interval expires without the user providing a Life Check, an Emergency Alert will automatically be triggered.

When users exit the Life Check Zone they automatically get enrolled into safe mode (green). This automated process shall prevent workers to forget enrolling themselves into Life Check Mode creating a potential scenario of non-compliance.

Creating Life Check Zones

Click on the Location button on the bottom right of the main screen. Then click on the + button to add a location.Add location

In the Add New Location window:

  1. Choose Location Type: Geofence
  2. Geofence type: Life Check Zone
  3. In the map window, move the crosshair on the center of the targeted geofence area
  4. Modify the radius (maximum is 1,000m (=1,100 yards), for accuracy reasons the minimum should not be below 25min)
  5. Click “Next”
add life check zone

On the next screen:

  1. Choose Group
  2. Enter a Location Name as it should show up in the location menu
  3. You can modify the address location if it wasn’t recognized properly
  4. Add any information to display when a person enters this geofence
edit location

Trusted By

Want to Know More?

Call us at 1-866-626-6545

Or email us at [email protected]

Ready to Get Started?